JET GH-2280ZX Lathe with Collet Closer

JET GH-2280ZX Lathe with Collet Closer

Details Features:

• ISO 9001 certified manufacturer
• 3-1/8 in. bore spindle is supported by two tapered and one ball bearing
• Chrome molybdenum headstock gears are hardened, ground and shaved
• Universal gearbox allows inch, metric, diametral and module pitch threads, no gear change required
• Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
• T-slotted compound slide featuring a four-way tool post
• One piece cast iron base absorbs vibration allowing heavier cuts
• High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
• Removable gap allows up to 23-5/8 in. diameter work on 16 in. and 27-1/2 in. on 18 in.
• Five position automatic carriage stop increases productivity
• Attractive chrome control levers, dials and knobs complete this impressive package

What’s Included:

• GH-2280ZX Lathe with Collet Closer – 321496
• 10 in. 3-Jaw Chuck with Top Reversing Jaws
• 12 in. 4-Jaw Chuck
• 16 in. Face Plate
• 4-Way Tool Post
• Follow Rest
• Large Capacity Steady Rest
• Fully Integrated Coolant System
• Full Length Splash Guard and Coolant System
• Large, Easy-To-Use Foot Brake
• Articulating Halogen Work Lamp
• Centrally Located Controls with Jog Button
• Threading Dial
• Mounting Pads and Levelers
• Spindle Sleeve (MT-7 and MT-5)
• Dead Center and Live Center
• Tool Box and Adjusting Tools

• Manual

Spindle Speed Settings 12 Power Source Corded Range of Inch Threads (TPI) 1-5/8 – 72 Spindle Bore Diameter 3-1/8 in PreWired Voltage 460V Bed Width 13-1/8 in Swing Range (Cross Slide) 13 in No. of Inch Threads 61 Bed Construction Cast Iron Cross Slide Travel 12 in Motor Type Brushed Spindle Speed Range (RPM) 1800 Compound Slide Travel 5-1/8 in Range of Metric Threads 0.05 – 20 Steady Rest Capacity 3/8 in – 7-3/4 in No. of Metric Threads 24 Range of Cross Feeds (IPR) 0.0006 – 0.0360 Swing Range (Gap) 29-1/2 in Distance Between Centers 80 in Tool Size 1 x 1 in Gap Length 12 in Motor Phase 3 Range of Longitudinal Feed Rates (IPR) 0.0015-0.0900 in Spindle Taper (Tailstock) MT-5 Horsepower 10 Voltage 230V Spindle Mount Taper Yes Carriage Travel 74-5/16 in Spindle Travel (Tailstock) 5 in Drive Type Geared Head Clutch Follow Rest Capcacity 1/2 – 3-1/2 in No. of Longitudinal Feed Rates 46 No. of Cross Feed Rates 31 Swing Range (Bed) 22 in Spindle Mount Yes Length 136 in. Width 45 in. Height 71 in. Weight 6933 lbs. Warranty Term 2 Year