JET GH-1880ZX Lathe with 2-Axis NEWALL DP700 DRO Installed

JET GH-1880ZX Lathe with 2-Axis NEWALL DP700 DRO Installed

Details Features:

• ISO 9001 certified manufacturer
• 3-1/8 in. bore spindle is supported by two tapered and one ball bearing
• Chrome molybdenum headstock gears are hardened, ground and shaved
• Universal gearbox allows inch, metric, diametral and module pitch threads, no gear change required
• Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
• T-slotted compound slide featuring a four-way tool post
• One piece cast iron base absorbs vibration allowing heavier cuts
• High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
• Removable gap allows up to 23-5/8 in. diameter work on 16 in. and 27-1/2 in. on 18 in.
• Five position automatic carriage stop increases productivity
• Attractive chrome control levers, dials and knobs complete this impressive package

What’s Included:

• GH-1880ZX Lathe with 2-Axis NEWALL DP700 DRO Installed – 321488
• 10 in. 3-Jaw Chuck with Top Reversing Jaws
• 16 in. Face Plate
• 12 in. 4-Jaw Chuck
• 4-Way Tool Post
• Follow Rest
• Large Capacity Steady Rest
• Fully Integrated Coolant System
• Full Length Splash Guard and Coolant System
• Large, Easy-To-Use Foot Brake
• Articulating Halogen Work Lamp
• Centrally Located Controls with Jog Button
• Threading Dial
• Mounting Pads and Levelers
• Spindle Sleeve (MT-7 and MT-5)
• Dead Center and Live Center
• Tool Box and Adjusting Tools

• Manual

Spindle Speed Settings 12 Power Source Corded Range of Inch Threads (TPI) 1-5/8 – 72 Spindle Bore Diameter 3-1/8 in PreWired Voltage 230V Bed Width 13-1/8 in Swing Range (Cross Slide) 11 in No. of Inch Threads 61 Bed Construction Cast Iron Cross Slide Travel 9 in Motor Type Brushed Spindle Speed Range (RPM) 1800 Compound Slide Travel 5-1/8 in Range of Metric Threads 0.05 – 20 Steady Rest Capacity 3/8 in – 7-3/4 in No. of Metric Threads 24 Range of Cross Feeds (IPR) 0.0006 – 0.0360 Swing Range (Gap) 27-1/2 in Distance Between Centers 80 in Tool Size 1 x 1 in Gap Length 12 in Motor Phase 3 Range of Longitudinal Feed Rates (IPR) 0.0015-0.0900 in Spindle Taper (Tailstock) MT-5 Horsepower 3 Voltage 230V/460V Spindle Mount Taper Yes Carriage Travel 74-5/16 in Spindle Travel (Tailstock) 5 in Drive Type Geared Head Clutch Follow Rest Capcacity 1/2 – 3-1/2 in No. of Longitudinal Feed Rates 46 No. of Cross Feed Rates 31 Swing Range (Bed) 18 in Spindle Mount Yes Weight 6590 lbs. Warranty Term 2 Year