JET GH-1880ZX Lathe with 300S Collet Closer and Taper Attachment

JET GH-1880ZX Lathe with 300S Collet Closer and Taper Attachment

Details Features:

• ISO 9001 certified manufacturer
• 3-1/8 in. bore spindle is supported by two tapered and one ball bearing
• Chrome molybdenum headstock gears are hardened, ground and shaved
• Universal gearbox allows inch, metric, diametral and module pitch threads, no gear change required
• Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
• T-slotted compound slide featuring a four-way tool post
• One piece cast iron base absorbs vibration allowing heavier cuts
• High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
• Removable gap allows up to 23-5/8 in. diameter work on 14 in, 25-7/8 in. on 16 in, 27-1/2 in. on 18 in. and 29-1/2 in. on 22 in.
• Five position automatic carriage stop increases productivity
• Attractive chrome control levers, dials and knobs complete this impressive package

What’s Included:

• GH-1880ZX Lathe with 300S, Collet Closer and Taper Attachment – 321599
• 10 in. Scroll 3-Jaw Chuck with Top Reversing Jaws
• 12 in. Independent 4-Jaw Chuck
• 12 in. Face Plate (16 in. Models)
• 16 in. Face Plate (18 in. Models)
• 4-Way Tool Post
• Follow Rest
• Large Capacity Steady Rest
• Fully Integrated Coolant System
• Full Length Splash Guard and Coolant System
• Large, Easy-To-Use Foot Brake
• Articulating Halogen Work Lamp
• Centrally Located Controls with Jog Button
• Threading Dial
• Spindle Sleeve (MT-7 and MT-5)
• Mounting Pads and Levelers
• Dead Center and Live Center

• Manual

Spindle Speed Settings 12 Power Source Corded Range of Inch Threads (TPI) 1-5/8 – 72 Spindle Bore Diameter 3-1/8 in PreWired Voltage 460V UL Safety No Range of Cross Feeds (IPR) 0.0006 – 0.0360 Swing Range (Gap) 27-1/2 in CSA Safety No Distance Between Centers 80 in Bed Width 13-1/8 in Tool Size 1 x 1 in Gap Length 12 in Swing Range (Cross Slide) 11 in No. of Inch Threads 61 Motor Phase 3 Range of Longitudinal Feed Rates (IPR) 0.0015-0.0900 in Bed Construction Cast Iron Spindle Taper (Tailstock) MT-5 Cross Slide Travel 9 in Horsepower 7.5 Motor Type Brushed Voltage 230V Spindle Mount Taper Yes Carriage Travel 74-5/16 in Spindle Speed Range (RPM) 1800 Compound Slide Travel 5-1/8 in Range of Metric Threads 0.05 – 20 Spindle Travel (Tailstock) 5 in Steady Rest Capacity 3/8 in – 7-3/4 in No. of Metric Threads 24 Drive Type Geared Head Clutch Follow Rest Capcacity 1/2 – 3-1/2 in No. of Longitudinal Feed Rates 46 No. of Cross Feed Rates 31 Swing Range (Bed) 18 in ETL Safety No Spindle Mount Yes Length 136 in. Width 44 in. Height 66 in. Weight 6590 lbs. Warranty Term 2 Year